Loren Data's SAM Daily™

SAMDAILY.US - ISSUE OF AUGUST 16, 2020 SAM #6835
SOLICITATION NOTICE

99 -- CONTROL ASSY HY,AIR

Notice Date

8/14/2020 7:41:22 AM
 

Notice Type

Solicitation
 

NAICS

333999 — All Other Miscellaneous General Purpose Machinery Manufacturing
 

Contracting Office

DLA AVIATION AT PHILADELPHIA, PA PHILADELPHIA PA 19111-5098 USA
 

ZIP Code

19111-5098
 

Solicitation Number

SPRPA120RZ192
 

Response Due

8/31/2020 12:00:00 AM
 

Archive Date

09/15/2020
 

Point of Contact

Telephone: 2157374024
 

E-Mail Address

THOMAS.KUHNLE@DLA.MIL
(THOMAS.KUHNLE@DLA.MIL)
 

Awardee

null
 

Description

ITEM UNIQUE IDENTIFICATION AND VALUATION (MAR 2016)|19|||||||||||||||||||| HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT|8|ISO 9001 or its equivalent.|||||||| TIME OF DELIVERY (JUNE 1997)|20|0001|04 EA|Best Available|||||||||||||||||| STOP-WORK ORDER (AUG 1989)|1|| WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (DEC 2018)|16|N/A|INVOICE 2in1|TBD|SPRPA1|TBD|TBD|SEE SCHEDULE|TBD|N/A|N/A|TBD|N/A|N00383|N/A|N/A|N/A| NAVY USE OF ABILITYONE SUPPORT CONTRACTOR - RELEASE OF OFFEROR INFORMATION (3-18))|2||| VALUE ENGINEERING (OCT 2010)|3|||| EQUAL OPPORTUNITY (SEP 2016)|2||| SMALL BUSINESS SUBCONTRACTING PLAN (DOD CONTRACTS)- BASIC (DEC 2019)|2||| INTEGRITY OF UNIT PRICES (OCT 2010)|1|| EQUAL OPPORTUNITY FOR VETERANS (OCT 2015)|4||||| WARRANTY OF SUPPLIES OF A NONCOMPLEX NATURE (JUN 2003)|6|12 MONTHS AFTER THE DATE OF THE LAST DELIVERY UNDER THIS CONTRACT.|45 DAYS AFTER THE DATE OF THE LAST DELIVERY UNDER THIS CONTRACT.||||| SMALL BUSINESS SUBCONTRACTING PLAN (AUG 2018)(DEVIATION 2018-O0018)|5|||||TBD| EQUAL OPPORTUITY FOR WORKERS WITH DISABILITIES (JUL 2014)|2||| TRANSPORTATION OF SUPPLIES BY SEA (FEB 2019)|2||| BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM (DEC 2017)|5|||||| LIMITATION OF LIABILITY--HIGH-VALUE ITEMS (FEB 1997)|1|| ESTIMATE OF PERCENTAGE OF RECOVERED MATERIAL CONTENT FOR EPA DESIGNATED PRODUCTS (MAY 2008))|1|| ALTERNATE A, ANNUAL REPRESENTATIONS AND CERTIFICATIONS (JUN 2019)|11|||||||||||| BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM CERTIFICATE (NOV 2014))|5|||||| BUY AMERICAN--BALANCE OF PAYMENTS PROGRAM (NOV 2014)|1|| ROYALTY INFORMATION (APR 1984)|1|| ANNUAL REPRESENTATIONS AND CERTIFICATIONS (DEC 2019)|12|336413|1250||||||||||| REPRESENTATION REGARDING CERTIAN TELECOMMUNICATIONS AND VIDEO SUREILLANCESERVICES OR EQUIPMENT (AUG 2019))|2||| FACSIMILE PROPOSALS (OCT 1997)|1|| NOTICE OF PRIORITY RATING FOR NATIONAL DEFENSE, EMERGENCY PREPAREDNESS, ANDENERGY PROGRAM USE (APR 2008))|2||X| The purpose of this amendment is to incorporate the following: FAR 52.204-24, FAR 52.204-25, FAR 52.204-26 and DFARS 252.204-7016. The purpose of this amendment is to incorporate TDR-20-10009. No drawings are available for this Request for Quotation. For Critical Safety Items (CSI), DFARS clause 252.209-7010, Identification of Critical Safety Items, is incorporated by reference. For items for which Government inspection and acceptance will be conducted at the source, DLAD clause 52.246-9004, Product Verification Testing, is incorporated by reference. DLAD clauses can be viewed at http://www.dla.mil/Acquisition/Pages/DLAD.aspx. As applicable, DFARS clause 252.242-7005, Contractor Business Systems, is incorporated by reference. This Solicitation is being issued under SEPA Authority. \ 1. SCOPE 1.1 . Markings shall be in accordance with MIL-STD-130. 1.2 PRE-AWARD / POST AWARD REQUIREMENTS: Due to the critical use of this item and its quality history, a pre-award survey and post-award conference may be required for all new manufacturers. For all previous sources, a post-award conference may be recommended. 1.3 . The contractor shall include on the detailed process/operation sheets developed, (1) all in house manufacturing processes and (2) the identity of all manufacturing sources performing processes/operations outside their facility. These sheets shall not be revised or altered after the successful completion of First Article or Production Lot Testing without approval from the Basic Design Engineering activity, via the PCO. 1.4 . Unless otherwise specified, for fabricated parts, the Inspection Method Sheets/ Final Inspection Sheets shall list the characteristics of each item produced under the contract. The manufacturer shall be required to provide certifications of all raw material including castings and forgings. the material source shall be identified and the documentation shall be able to identify the customer and/or contract number. The manufacturer shall maintain all raw material documentation for a minimum of ten (10) years. The contractor is responsible for providing completed Inspection Method Sheets/Final Inspection Sheets showing the actual dimensions taken for ALL Characteristics,in addition, critical characteristics shall be annotated. 1.5 The components being acquired under this solicitation have been classified as Flight Critical requiring engineering source approval by the Naval Air Systems Command. Only those companies who have submitted requests for source approval and been approved will be eligible for award under this solicitation. Any company not previously approved may submit a Source Approval Request to the contracting officer, Naval Inventory Control Point, (See Block 10 of the SF33 for name and code). The Source Approval Request shall contain the following documentation and shall be submitted by the closing date of this solicitation: (A) Copy of complete configuration drawings for a similar item(s) which your company has produced within the past three years, including test procedures for which your company (1) has been qualified to manufacture and (2) which is similar, i.e., requires the same materials, manufacturing processes, inspections, tolerances and similar application as the item(s) for which you are seeking approval. (B) Copy of the complete process/operation sheets used to manufacuture the similar item, including but not limited to, detailed shop sketches. These plans must note those operations and processes performed by subcontractors/ vendors. (C) Complete copies of purchase orders, shipping documents, etc. that document delivery of production quantities of the part to the Original Equipment Manufacturer or Military service. Provide the most recent copies of the documents. (D) A detailed comparative analysis of the differences/similarities between the similar part and the part(s) for which you are seeking approval. This analysis should include materials, configuration, tolerances, process requirements, dimensions, castings, forgings, etc. (E) Copy of inspection method sheets used in the manufacturing and at final inspection. These sheets should include actual tolerance, print requirements, inspection devices, sources performing the operation and level of inspection. Critical characteristics should be discernible from all other characteristics. The above requirements are a subset of requirements specified in the ASO Source Approval Information Brochure dated January 1995. The submission of this data subset is contingent upon and in consideration of the submitting contractor meeting all other requirements specified in this solicitation to include a bilateral agreement with MDA which includes availability of complete data, MRB disposition, etc. Any company not having such agreement, but desiring to seek engineering source approval, will be required to submit data meeting all requirements of the ASO/NAVICP Source Approval Brochure. 1.6 Articles to be furnished hereunder shall be manufactured, tested and inspected in accordance with ;NAWC LAKEHURST; drawing number ( ;80020; ) ;6544E026-7; , Revision ;AK; and all details and specifications referenced therein. 1.7 Unless expressly provided for elsewhere in this clause, equipment such as fixtures, jigs, dies, patterns, mylars, special tooling, test equipment, or any other manufacturing aid required for the manufacture and/or testing of the subject item(s) will not be provided by the Government or any other source and is the sole responsibility of the contractor. The foregoing applies notwithstanding any reference to such equipment or the furnishing thereof that may be contained in any drawing or referenced specification. 1.8 If MIL-STD-454 is referenced in the drawings or in the specification, the contractor is expected to show compliance with IPC/EIAJ-STD-001C. 2. APPLICABLE DOCUMENTS DRAWING DATA=6544E026 |80020|AK| |C| | | | 3. REQUIREMENTS - NOT APPLICABLE 4. QUALITY ASSURANCE 4.1 CRITICAL MANUFACTURING PROCESSES ( ; ; ) HEAT TREAT ( ;APPLIES; ) WELDING ( ; ; ) CADMIUM PLATING ( ; ; ) ENGINEERING CHROME PLATING ( ; ; ) NICKEL CHROME PLATING ( ; ; ) CASTING(S) ( ; ; ) FORGING(S) ( ; ; ) MPR (MATERIAL PROCESSING REQUIREMENTS) 4.2 The test to be performed under the First Article approval clause (FAR 52.209-3) of the contract are listed below 4.2.1 Dimensional test (special) ;NOMINAL TOLERANCES; 4.2.2 Requirements of: ;LKE DRAWING PACKAGE; 4.2.3 Form ;APPLIES; 4.2.4 Fit ;N/A; 4.2.5 Function ;N/A; 4.2.6 Compliance with drawing ( ;80020; ) ;6544E026-7; , Revision ;AK; and specifications referenced therein. 4.3 In addition to the above tests, the First Article(s) to be inspected hereunder shall also be subjected to those tests which will demonstrate that the article(s) comply with the contract requirements 4.4 The contractor shall be responsible for providing the necessary parts and repair of the First Article Sample(s) during inspection 4.5 The contractor shall notify the PCO, ACO, and QAR fourteen (14) days prior to conducting the First Article test so that the Government may witness such testing. 4.5.1 The QAR shall be present to witness all First Article Testing. 4.5.2 The following additional personnel shall witness the First Article Testing: ;ROY JANNEY NAWC QA REP AT FAX (732) 323-1381; 4.6 Disposition of FAT samples 4.6.1 ; ; Sample(s) may be destroyed during testing. 4.6.2 ;APPLIES; Unless otherwise provided for in the contract, sample(s) shall remain at the contractor and may be considered as production items under the contract provided the sample(s) can be refurbished to ready for issue condition and provided the sample(s) have inspection approval of the cognizant DCMC QAR. Sample(s) may be shipped as production items only after all other units required under the contract have been produced and are ready for shipment. 4.7 Test Sample Coating Instructions 4.7.1 Samples are to be unpainted. Corrosive areas are to be coated with a light preservative if required. 4.8 Notice to Government of Testing at the contractors facility. 4.8.1 FAR 52.209-3 applies (A) The contractor shall present ;0NE; ; unit(s) of the following CAGE( ;80020; ; ), Part Number ;6544E026-7; ; , Revision ;AK; ; as specified in this contract. At least fourteen (14) calendar days before the beginning of the First Article testing, the contractor shall notify the contracting officer, in writing, of the time and location of the testing so that the Government may witness the tests. (B) The contractor shall submit the First Article Test Report within 15 calendar days from the date of testing to: ;PCO; ; The contractor shall mark the report ""First Article Test Report"" and cite the contract number and lot/item number. Review documentation as provided under the DD1423 requirements. (C) Within 45 calendar days after the Government inspects the First Article, the contracting officer shall notify the contractor, in writing, of the approval, conditional approval, or disapproval of the First Article. The notice of approval, conditional approval, or disapproval shall not relieve the contractor from complying with all requirements of the specifications and all other terms and conditions of this contract. A notice of conditional approval shall state any further action required of the contractor. A notice of disapproval shall cite reasons for disapproval. (D) If the First Article is disapproved, the contractor, upon Government request shall repeat any or all First Article Tests. After each request for additional tests, the contractor shall make any necessary changes, modifications, or repairs to the First Article or select another First Article for testing. All costs related to these tests are to be borne by the contractor, including any and all costs for additional tests following a disapproval. The contractor shall then conduct the tests and deliver another report to the Government under the terms and conditions and within the time specified in paragraph B above. The Government reserves the right to require an equitable adjustment of the contract price for any extension of the delivery schedule or for any additional costs to the Government related to these tests. (E) If the contractor fails to present any First Article on time, or the contracting officer disapproves any First Article, the contractor shall be deemed to have failed to make delivery within the meaning of the default clause of this contract. (F) Unless otherwise provided in the contract, and if the approved First Article is not consumed or destroyed in testing, the contractor may deliver the approved First Article as part of the contract quantity if it meets all contract requirements for acceptance. (G) If the Government does not act within the time specified in paragraph (C) above the contracting officer, shall, upon timely written request from the contractor, equitably adjust under the Changes clause of this contract the delivery or performance dates and/or the contract price, and any other contractual term affected by the delay. (H) Before First Article Approval, the acquisition of materials or components for, or the commencement of production or, the balance of the contract quantity is at the sole risk of the contractor. Before First Article approval, the costs thereof shall not be allocated to this contract for 1) progress payments, or 2) termination settlements if the contract is terminated for the convenience of the Government. The contractor is responsible for providing operating and maintenance instructions, spare parts, and repair of the First Article during any First Article test. (I) The contractor shall produce both the First Article and the production quantity at the same facility and shall submit a certification to the effect with each First Article. (J) The test report (2 copies) shall be in accordance with MIL-STD-831, unless otherwise specified on the DD1423, and shall be submitted via the cognizant DCMC to NAVSUP, ATTN: (Cite name and code in Block 10.a of the SF33). The DCMC shall provide comments on Form DD1222 (2 copies) which shall be forwarded with the test report. Approval of the test report is the PCO's responsibility. Upon notification of approval, condition approval, the ACO shall execute the DD250 to indicate Government acceptance of the test report. 4.9 Alternate Offers - Waiver of First Article Approval Requirements. (The following provisions supersede any waiver of First Article Approval Requirements terms set forth in clause 52.209-3 or 52.209-4 as appropriate) (A) Unless otherwise specified in the solicitation, NAVSUP WSS reserves the right to waive the First Article Approval Requirements specified herein for offerors who have previously furnished identical production articles accepted by the Government or the Original Equipment Manufacturer/Prime Manufacturer. An offeror requesting waiver of First Article Requirements shall submit evidence with its offer establishing that: (I) the last production unit was delivered within three (3) years of the issue date of this solicitation, and (II) the production location to be used for this requirement is the same as used for the previous production run. Additionally, the offeror shall submit a certification, to be executed by the officer or employee for the offer, stating that: (I) the articles to be provided will be produced using the same facilities, processes, sequences of operations and approved subcontractors as those previously delivered and accepted by the Government or the Original Equipment Manufacturer/Prime Manufacturer, and (II) the previous production units were manufactured without Material Review Board disposition or waiver/deviation request or rejection of pre-production samples for cause. (NOTE: This certification concerns a matter within the jurisdiction of an agency of the United States and the making of a false, fictitious, or fraudulent certification may render the maker subject to prosecution under Title 18, United States Code, Section 1001.) (B) Offerors requesting waiver of First Article Approval Requirements under the provisions of this clause are cautioned to submit two prices for articles required herein - one that is based on compliance with the First Article Approval Requirements and one that is based on a waiver of such requirements. Where an offeror submits only one price and fails to clearly state that the price is based on waiver of the First Article Approval Requirements it will be deemed to be based on compliance with the First Article Approval Requirements (C) In the event of the First Article Approval Requirement is granted, the delivery schedule for the production items shall be reduced by the number of days designated for delivery of First Article Test unit plus the number of calendar days indicated for the government notification of conditional approval or approval. These requirements are specified in the quality assurance section of this solicitation. If the offeror is unable to meet the desired schedule, he shall insert below the alternate delivery schedule he offers to the government. Offeror's Proposed Alternate Delivery Schedule (Based on waiver of First Article Approval Requirements) Within Days: Item No. _____________ Quantity:_______ After Date of Contract:_________ 4.10 . Mandatory Inspection Requirements: 100% Procurement Contracting Officer (PCO) mandatory inspection is required and shall be accomplished at source under the surveillance and final approval of the cognizant DCMAO Quality Assurance Representative (QAR). During production, mandatory inspection is required to be accomplished by the contractor as follows: A. Level of Inspection (LOI). 1. Critical characteristics: 100% inspection shall apply. 2. Major and Minor characteristics: LOI shall be in accordance with a sampling plan acceptable to the QAR. B. Critical characteristics: ;IF APPLICABLE, ALL ACTUAL DIMENSIONS OF ANY MAJOR OR CRITICAL CHARACTERISTICS SHALL BE RECORDED. THE AMBEINT TEMPERATURE SHALL BE RECORDED AT TIME MEASUREMENTS ARETAKEN. CERTIFICATIONS TO BE ON FILE FOR A MINIMUM OF SEVEN YEAR AFTER DELIVERY OF CONTRACT; C. Major and Minor characteristics 1. Shall be defined by the contractor subject to QAR concurrence, unless defined on applicable drawings and associated specifications. 5. PACKAGING- MIL-STD 2073 PACKAGING APPLIES AS FOUND ELSEWHERE IN THE SCHEDULE 6. NOTES - NOT APPLICABLE THIS IS A ALRE CRITICAL APPLICATION ITEM. FOR DRAWING UPDATES, SEE ATTACHED NAWC LKE DRAWING UPDATE SHEET. NAVSUP REFERENCE ONLY: (20-10005): THE COMPONENTS BEING ACQUIRED UNDER THIS SOLICITATION HAVE BEEN CLASSIFIED AS ""CRITICAL"" REQUIRING ENGINEERING SOURCE APPROVAL BY NAVAL AIR SYSTEMS COMMAND ONLY THOSE COMPANIES WHO HAVE SUBM& BEEN APPROVED WILL BE ELIGIBLE FOR AWARD UNDER THIS SOLICITATION ANY COMPANY SUBMIT A SOURCE APPROVAL REQUEST AS OUTLINED IN THIS SOLICITATION. Unique Requirements: TDR is requiring the submission of data covering all partscomponents and assemblies, including material certifications, non-destructive inspection process data, welding procedures/qualifications (as applicable), etcSubmission of certain data may be rendered inapplicable, contingent upon items being either overhauled or replaced, based on its condition and per the guidelines of approved overhaul/repair procedures. \ DATE OF FIRST SUBMISSION=180 DAC ALL CERTIFICATIONS. TEST REPORTS, AND IN-PROCESS INSPECTION DOCUMENTS NEEDED TO SUBSTANTIATE PRODUCT QUALITY SHALL BE AVAILABLE WITH THE FIRST ARTICLE WHEN PRESENTED FOR INSPECTION AT CONTRACTORS FACILITY. NOTIFICATION OF 14 DAYS PRIOR TO PRESENTATION FOR INSPECTION MUST BE GIVEN TO ROY JANNEY NAWC QA AT FAX (732) 323-1381. Data Requirements: a. Copies of all approved requests for variations. b. Assembly per drawing 6544E026, 6300-001, 6544C076 c. Material and mill certifications per drawing 6544D025, 6544D075,6544D078, 6544C079, 6544C080, 6544C081, 6544C082, 6544C068, d.Dimensions per drawing 6544D025, 6544D075, 6544D078, 6544C079,6544C080, 6544C081, 6544C082, 6544E067, 6544E073, 6544C068,6544C069, 6544D084, 6544D627, 6544D613, 6544D599, 6544D645, 6544C071, 6544C121, 6544C077, 6544C124, 6544C119 e. In system performance per drawing 6544D025, 6544D075, 6544D078,6544C079, 6544C080, 6544C081, 6544C082 f.Environmental compliance per drawing 6544D025, 6544D075, 6544D078,6544C079, 6544C080, 6544C081, 6544C082 g.Identification and marking per drawing 6544D025,6544D075, 6544D078,6544C079, 6544C080, 6544C081, 6544C082, 6544E067, 6544E073,6544C068, 6544C069, 6544D627, 6544D613, 6544D599, 6544D645,6544C071, 6544C076, 6544C121, 6544C077, 6544C124, 6544C119 h.Qualification test plan IAW NAWC TP-ACC-002 per drawing 6544D075 i.Qualification test plan IAW NAEC TP-ACC-002 per drawing 6544D078,6544C079, 6544C080, 6544C081, 6544C082 j.Finish per drawing 6544E067, 6544E073, 6544C071,6544C077, k.Weld per drawing 6544E073 (weld procedures & welding procedures quali- fications per either NAVSEA or AWS CDRLs) l. Sil-Braze per drawing 6544D084 m. Working & Bursting pressure per drawing 6544D599, 6544D645 DATE OF FIRST SUBMISSION=ASREQ Block 6: Forward additonal copy to ASO code cited in block 10.A on page 1. THE FOLLOWING CERTIFICATIONS SHALL BE ON FILE AT THE TIME OF FINAL INSPECTION: Data Requirements: a. Copies of all approved requests for variations. b. Assembly per drawing 6544E026, 6300-001, 6544C076 c. Material and mill certifications per drawing 6544D025, 6544D075,6544D078, 6544C079, 6544C080, 6544C081, 6544C082, 6544C068, d.Dimensions per drawing 6544D025, 6544D075, 6544D078, 6544C079,6544C080, 6544C081, 6544C082, 6544E067, 6544E073, 6544C068,6544C069, 6544D084, 6544D627, 6544D613, 6544D599, 6544D645, 6544C071, 6544C121, 6544C077, 6544C124, 6544C119 e. In system performance per drawing 6544D025, 6544D075, 6544D078,6544C079, f. Environmental compliance per drawing 6544D025, 6544D075, 6544D078,6544C079, 6544C080, 6544C081, 6544C082 g.Identification and marking per drawing 6544D025, 6544D075, 6544D078, 6544C079, 6544C080, 6544C081, 6544C082, 6544E067, 6544E073,6544C068, 6544C069, 6544D627, 6544D613, 6544D599, 6544D645,6544C071, 6544C076, 6544C121, 6544C077, 6544C124, 6544C119 h.Qualification test plan IAW NAWC TP-ACC-002 per drawing 6544D075i.Qualification test plan IAW NAEC TP-ACC-002 per drawing 6544D078, 6544C079, 6544C080, 6544C081, 6544C082 i. Qualification test plan IAW NAEC TP-ACC-002 per drawing 6544D078,6544C079, 6544C080, 6544C081, 6544C082 j. Finish per drawing 6544E067, 6544E073, 6544C071, 6544C077, k. Weld per drawing 6544E073 (weld procedures & welding procedures quali- fications per either NAVSEA or AWS CDRLs) l. Sil-Braze per drawing 6544D084 m. Working & Bursting pressure per drawing 6544D599, 6544D645 DATE OF FIRST SUBMISSION=ASREQ Block 6: Forward additonal copy to ASO code cited in block 10.A on page 1. Welding Procedures Data Requirements: (As required based on repair process/procedure) a.Weld procedure IAW NAVSEA S9074-AR-GIB-010/278^ para 4.2 per Drawing 6544E073. DATE OF SUBSEQUENT SUBMMISION:Approval or reason for disapproval shall be given Addresses for NAVAIR Codes: NAVAIRWARCENACDIVLKE Code 4.8.2 Bldg 596 HWY 547 JOINT BASE MDL, NJ 08733-5000 NAVAIRWARCENACDIVLKE Code 4.3.4 Bldg 562 HWY 547 JOINT BASE MDL, NJ 08733-5000 NAVAIRWARCENACDIVLKE Code 4.8.8.8 Bldg 148 HWY 547 JOINT BASE MDL, NJ 08733-5000 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Welding Procedure Qualification Report Data Requirements: (As required based on repair process/procedure) a. The Weld Procedure Qualification Test Report, including all supporting test reports and documentation, IAW NAVSEA S9074-AQ-GIB-010/248^ para 4.2.3 and 4.6 Drawing 6544E073 DATE OF SUBSEQUENT SUBMMISION:Approval or reason for disapproval shall be given Addresses for NAVAIR Codes: NAVAIRWARCENACDIVLKE Code 4.8.2 Bldg 596 HWY 547 JOINT BASE MDL, NJ 08733-5000 NAVAIRWARCENACDIVLKE Code 4.3.4 Bldg 562 HWY 547 JOINT BASE MDL, NJ 08733-5000 NAVAIRWARCENACDIVLKE Code 4.8.8.8 Bldg 148 HWY 547 JOINT BASE MDL, NJ 08733-5000 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Welding Procedures (As required based on repair process/procedure) Data Item Description, Section 7.1 is amended to include the following: Weld procedure IAW AWS D1.1 (Structural Steel) clause 4, AWS D1.2 (Aluminum)clause 3, AWS D1.6 (Stainless) clause 4 or other specifications as listedonthe system drawings For the purposes of AWS welding requirements, ""Owner"" is defined as NAVAIR Lakehurst and ""Engineer"" is defined as engineering authority who resides in NAVAIR code 4.8.2 Block 7 and 8: The CDRL Deliverable shall be approved by a designated government representative via a Program Management correspondence. Government has 30 days to review and provide comments or approval. Additional review time may be required based on high volume of submittals such that the number or reviews in process exceed ten procedures. Contractor has 45 days after receipt of Government comments to resubmit. Block 9: See Exhibits, Distribution Statement. Block 10: Deliver one time for each weld application type for each contractor or subcontractor. For previously approved procedures, contractor may submit proof of previous approval. Block 12: Submit NLT 60 days prior to start of manufacture of items requiring welding governed by AWS welding requirements. Block 13: Contractor must resubmit for any changes in procedure or change in weld activity location Block 14: Electronic copies of all data submittals shall be provided and accessible via the integrated digital environment. Notification shall be provided by email iaw Supplement 2 to Exhibits, CDRL Addressees ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Welding Procedures Qualification Test Report (As required based on repair process/procedure) Block 4: Data Item Description, Section 7.1 is amended to include the followingThe Weld Procedure Qualification Test Report, including all supporting materialand laboratory test reports and documentation, IAW AWS D1.1 (Structural Steel) clause 4, AWS D1.2 (Aluminum) clause 3, AWS D1.6 (Stainless) clause 4 or other specifications as listed on the system drawings. For the purposes of AWS welding requirements, ""Owner"" is defined as NAVAIR Lakehurst and ""Engineer"" is defined as engineering authority who resides in NAVAIR Code 4.8.2. Block 7 and 8: The CDRL Deliverable shall be approved by a designated Government representative via a Program Management correspondence.Government has 30 days to review and provide comments or approval. Additional review time may be required based on high volume of submittals such that the number of reviews in process exceed ten procedures. Contractor has 45 days after receipt of Government comments to resubmit. Block 9: See Exhibits, Distribution Statement. Block 10: Deliver one time for each weld application type for each contractor or subcontractor For previously approved procedures, contractor may submit proof of previous approval. Block 12: Submit NLT 60 days prior to start of manufacture of items requiring welding governed by AWS welding requirements Block 13: Contractor must resubmit for any changes in procedure or change in weld activity location. Block 14: Electronic copies of all data submittals shall be provided and access via the integrated digital environment. Notification shall be provided by email IAW with Supplement 2 to Exhibits, CDRL Addressees.
 

Web Link

SAM.gov Permalink
(https://beta.sam.gov/opp/70b5d33b76b94d61936b8e0ae8c5bfb7/view)
 

Record

SN05759436-F 20200816/200814230159 (samdaily.us)
 

Source

SAM.gov Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's SAM Daily Index Page |