Loren Data's SAM Daily™

SAMDAILY.US - ISSUE OF JULY 23, 2025 SAM #8640
SOLICITATION NOTICE

20 -- USCGC Walnut Door and Scuttles

Notice Date

7/21/2025 9:50:58 AM
 

Notice Type

Combined Synopsis/Solicitation
 

NAICS

336611 — Ship Building and Repairing
 

Contracting Office

SFLC PROCUREMENT BRANCH 2(00085) ALAMEDA CA 94501 USA
 

ZIP Code

94501
 

Solicitation Number

70Z08525Q0020638
 

Response Due

8/4/2025 8:00:00 AM
 

Archive Date

08/19/2025
 

Point of Contact

Justin Wooldridge, Phone: 2068205327, Lindsay Mongiovi, Phone: 5716086752
 

E-Mail Address

justin.r.wooldridge2@uscg.mil, lindsay.n.mongiovi@uscg.mil
(justin.r.wooldridge2@uscg.mil, lindsay.n.mongiovi@uscg.mil)
 

Small Business Set-Aside

SBA Total Small Business Set-Aside (FAR 19.5)
 

Description

CGC Walnut doors and scuttles RDD: 1/13/2026 Please see SOW in attachments Consolidated List of References The below-listed documents form a part of this specification to the extent specified herein. Approval/publication dates or revision dates/numbers are also identified, to ensure that same document versions are used at the time of specification writing and during contract execution. All Coast guard drawings, technical publications, and standard specifications will be provided to contractors by the Coast Guard at an appropriate time, or upon request, free of charge. Other Government documents may be accessed � free of charge � from links located on the SFLC website. Commercial sites provide access to their respective documents. COAST GUARD DRAWINGS Coast Guard Drawing 225 WLM 167-001, Rev W, 1997, Structural Closures Coast Guard Drawing 225 WLM 631-002, Rev B, 2019, Paint Schedule COAST GUARD PUBLICATIONS Coast Guard Commandant Instruction (COMDTINST) M10360.3, Jun 2006, Coatings and Colors Manual Surface Forces Logistics Center Standard Specification 0000 (SFLC Std Spec 0000), 2022, General Requirements Surface Forces Logistics Center Standard Specification 0000 (SFLC Std Spec 0000), 2022, General Requirements Surface Forces Logistics Center Standard Specification 0740 (SFLC Std Spec 0740), 2022, Welding and Allied Processes Surface Forces Logistics Center Standard Specification 6310 (SFLC Std Spec 6310), 2022, Requirements for Preservation of Ship Structures OTHER REFERENCES Code of Federal Regulations (CFR) Title 29, Part 1915, Occupational Safety and Health Standards for Shipyard Employment Commercial Item Description (CID) A-A-59316, 2016, Abrasive Materials; for Blasting Military Specification MIL-A-22262B, March 1996, Abrasive Blasting Media Ship Hull Blast Cleaning NAVSEA Technical Publication T9074-AD-GIB-010/1688, (TP 1688), July 2012, Requirements for Fabrication, Welding, and Inspection of Submarine Structure The Society for Protective Coatings (SSPC) Surface Preparation Standard No. 11 (SSPC-SP 11), 2013, Power-Tool Cleaning to Bare Metal The Society for Protective Coatings (SSPC)/NACE International (NACE) 2007, Joint Surface Preparation Standard SSPC-SP 10/NACE No. 2, Near-White Metal Blast Cleaning ITEM 1: Fabrication of Watertight Door and Scuttle 1. SCOPE 1.1 Intent. This work item describes the requirements for the Contractor to fabricate watertight doors, hatches, and scuttles identified in Table 1 in accordance with drawings and references. Table 1 - Watertight Doors and Scuttle locations Description Location P/N and Description QTY Drawing Weathertight Door (01-27-1) 01-26-0-C Buoy Deck Control Booth PN: 20 Weathertight Steel Door 26�x66�, Right Hand, w/ hasp and staple 01 Each 225 WLM 167-001 Raised Watertight Quick Acting Scuttle (01-20-2) Escape Trunk (1-19-2-T) PN: 6 Scuttle � 21� Dia C.O. Raised, Quick-acting, Watertight 01 Each 225 WLM 167-001 1.2 Government-furnished property None 2. REFERENCES Coast Guard Drawings Coast Guard Drawing 225 WLM 167-001, Rev W, 1997, Structural Closures Coast Guard Drawing 225 WLM 631-002, Rev B, 2019, Paint Schedule Coast Guard Publications Surface Forces Logistics Center Standard Specification 0000 (SFLC Std Spec 0000), 2022, General Requirements Surface Forces Logistics Center Standard Specification 0740 (SFLC Std Spec 0740), 2022, Welding and Allied Processes Surface Forces Logistics Center Standard Specification 6310 (SFLC Std Spec 6310), 2022, Requirements for Preservation of Ship Structures Other References Commercial Item Description (CID) A-A-59316, 2016, Abrasive Materials; for Blasting Military Specification MIL-A-22262B, March 1996, Abrasive Blasting Media Ship Hull Blast Cleaning The Society for Protective Coatings (SSPC)/NACE International (NACE) 2007, Joint Surface Preparation Standard SSPC-SP 10/NACE No. 2, Near-White Metal Blast Cleaning The Society for Protective Coatings (SSPC) Surface Preparation Standard No. 11 (SSPC-SP 11), 2013, Power-Tool Cleaning to Bare Metal 3. REQUIREMENTS 3.1 General. 3.1.1 CIR. None. 3.1.2 Tech Rep. Not applicable. 3.1.3 Protective measures. Not Applicable 3.1.4 Interferences. Not Applicable 3.1.5 Fabrication. Contractor shall fabricate the door and scuttle listed in Table 1 and in accordance with the references listed in section 2 of this document. 3.1.6 Testing. All testing to be completed in accordance with drawings and Surface Forces Logistics Center Standard Specification 0740 (SFLC Std Spec 0740), 2022, Welding and Allied Processes. 3.1.7 Shipping. Contractor shall construct container to ship doors and hatches and must include pricing for shipping to CGC WALNUT, CO LTJG Daniel Zarillo, USCGC WALNUT (WLB 205), 211 South Ave Suite C, Pensacola, FL, 32508. 4. NOTES None.
 

Web Link

SAM.gov Permalink
(https://sam.gov/opp/980a79ad2a2743b283cc0e806c95095e/view)
 

Place of Performance

Address: Pensacola, FL 32508, USA

Zip Code: 32508

Country: USA
 

Record

SN07517449-F 20250723/250721230044 (samdaily.us)
 

Source

SAM.gov Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's SAM Daily Index Page |