Loren Data's SAM Daily™

SAMDAILY.US - ISSUE OF JULY 31, 2025 SAM #8648
SOLICITATION NOTICE

44 -- Solicitation - ASR-9 Centrifugal Blowers - MMAC OKC

Notice Date

7/29/2025 8:33:36 AM
 

Notice Type

Solicitation
 

NAICS

334419 — Other Electronic Component Manufacturing
 

Contracting Office

6973GH FRANCHISE ACQUISITION SVCS OKLAHOMA CITY OK 73125 USA
 

ZIP Code

73125
 

Solicitation Number

6973GH-25-Q-00157_ASR-9_Blowers
 

Response Due

8/15/2025 10:00:00 AM
 

Archive Date

08/30/2025
 

Point of Contact

Raymond Lena
 

E-Mail Address

raymond.a.lena@faa.gov
(raymond.a.lena@faa.gov)
 

Small Business Set-Aside

SBA Total Small Business Set-Aside (FAR 19.5)
 

Description

2. SCOPE OF WORK The contractor must furnish all labor, facilities, equipment, and materials to procure and upgrade the Kooltronics Blowers for the FAA as outlined in each section that follows. The specific quantities of units include the following: 1. One Hundred (100) H03 Exhaust Blowers - K3BB58-3 2. One Hundred (100) H01 Centrifugal Blowers - K3BB58-2 3. Ship Blowers to Electro Mechanex LLC to perform the following updates: a. Dismantle, Clean Parts & Inspect all components. b. Check Windings for condition and integrity (Resistance, Hi-Pot, Surge Comparison Inductance testing & Ground Capacitance). c. Measure all Mechanical fits and record the dimensions. d. Dynamically Balance Rotor/Blower to a balance quality grade G2.5 (ISO 1940-1), for reduced vibration during operation. e. Bore & Sleeve DE/NDE Endbell to Mfg specifications. f. Fit Bearings in accordance with ABMA fitting procedures. g. Clean and Bake Windings with fresh BMG Polyurea EM lubricant. h. Assemble Motor and Test run at full rated voltage at 60HZ for full output speed. i. Record and Document All Electrical and Mechanical test measurements. j. Spray Paint the Motor Machinery Gray. k. Re-machine motor end bearing cups; adding steel sleeves and precisely locating center to reduce electromagnetic force (EMF) imbalance. l. Bearing Upgrade: Premium NTN Sealed Ball Bearing C3 m. Install high temperature, bearing thrust washers. n. Bearing lubricant (BMG Gen 2 Polyurea Motor Grease) rated for temperatures above 200�F o. Blowers dynamically balanced to a G2.5 grade. p. Add grommets to the mounting holes on the flange. 3. REQUIREMENTS 3.1 Production Units Delivery of production units shall begin NLT 300 days after receipt of order. 4. PREPARATION FOR DELIVERY 4.1 Preservation, Packaging, and Packing Preservation, packaging, and packing shall be IAW Provision 61.
 

Web Link

SAM.gov Permalink
(https://sam.gov/opp/bb97492b4992463c95afbf061ab3adf4/view)
 

Place of Performance

Address: Oklahoma City, OK 73169, USA

Zip Code: 73169

Country: USA
 

Record

SN07528487-F 20250731/250729230058 (samdaily.us)
 

Source

SAM.gov Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's SAM Daily Index Page |