SOLICITATION NOTICE
13 -- MK48 Pintles
- Notice Date
- 7/31/2025 2:18:08 PM
- Notice Type
- Solicitation
- NAICS
- 332722
— Bolt, Nut, Screw, Rivet, and Washer Manufacturing
- Contracting Office
- NAVAL UNDERSEA WARFARE CENTER KEYPORT WA 98345-7610 USA
- ZIP Code
- 98345-7610
- Solicitation Number
- N0025325Q7011
- Response Due
- 8/7/2025 3:00:00 PM
- Archive Date
- 09/03/2025
- Point of Contact
- Jessica Reichard
- E-Mail Address
-
jessica.r.reichard.civ@us.navy.mil
(jessica.r.reichard.civ@us.navy.mil)
- Small Business Set-Aside
- SBA Total Small Business Set-Aside (FAR 19.5)
- Description
- *** Amendment 0002- Answers solicitation questions (close date not extended from last date of 08/07/25) *** Amendment 0001- Solicitation amended to extend the close date. From 07/31/25 to 08/07/25. MK 48 Heavyweight (HWT) Chamber and Valve Assembly component, Pintle (P/N 2074431 NSN 1H 1355 010903808) to be manufactured in accordance with Drawings 2074431 Rev D, TR5624413 Specification Rev G, and the Statement of Work. _______________________________________________ Requirements and evaluation procedures will be listed in the solicitation, which is required to be completely filled out and returned before the solicitation closes. All questions regarding the solicitation should be submitted in writing as soon as practicable after receipt of solicitation. Questions and Offers should be submitted via e-mail to: jessica.r.reichard.civ@us.navy.mil No paper copies will be accepted. Only digital copies sent via email will be accepted. Failure to complete all representations and certifications found within the solicitation and respond to the RFQ with associated amendments if applicable prior to the closing date and time established may render an offer nonresponsive and result no longer being considered for award. Company quote forms may be provided but not substituted for a completed solicitation / amendment pages. The government terrms and conditions (T&C�s) listed in the solicitation are required by law through the Federal Acquisition Regulations (FAR) and the Department of Defense FAR Supplement (DFARS). It is requested that company T&C�s not be included with your quote submittal as many company T&C�s are inconsistent with federal law, are unenforceable, and cannot be accepted. National Institute of Standards and Technology (NIST) Special Publication (SP) 800-171 applies. The contractor shall have a current assessment (not more than 3 years old) for each covered contractor information system that is relevant to this requirement. Additional information regarding NIST SP 800-171 can be found at: https://www.acq.osd.mil/dpap/pdi/cyber/strategically_assessing_contractor_implementation_of_NIST_S171.html and https://www.sprs.csd.disa.mil/nistsp.htm. Spec and Drawings referenced in the solicitation are restricted by the Arms Export Act and are ONLY available to vendors/contractors appointed data custodian that are registered with Defense Logistics Agency (DLA) Joint Certification Program (JCP). Vendors/Contractors that are not registered with DLIS JCP can obtain registration information at: https://www.dla.mil/Logistics-Operations/Services/JCP/. Restricted drawings and technical information are available through Sam.Gov. ***NOTICE: To receive the drawings associated with this solicitation, the Company point of contact identified at https://public.logisticsinformationservice.dla.mil/jcp/search.aspx must send an email request to Jessica Reichard at Jessica.R.Reichard.civ@us.navy.mil. The request shall include: company name; complete address; CAGE code; and point of contact name, email address, phone number, and include a copy of the company's DD-2345. The drawings will be provided only to those companies with an active JCP certificate and a minimum Confidence Level Assessment of �Basic� in the NISTSP 800-171 Assessment Report contained in the Supplier Performance Risk System. Offerors must have a current registration in the System for Award Management (SAM) database, https://sam.gov/ a Federal governed owned website.
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/cdf0d6a24d21419288548bee40692d51/view)
- Place of Performance
- Address: Keyport, WA 98345, USA
- Zip Code: 98345
- Country: USA
- Zip Code: 98345
- Record
- SN07531991-F 20250802/250801000107 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |